Categories: Accessories, Patton, Patton SFPS

Patton CIT-SFP/RJ45

Original price was: $449.00.Current price is: $403.00.

Weight: 1 lbs
Dimensions: 8 × 8 × 4 in
Brand: Patton
Phone Type: SFP Modules

10 in stock

Sold: 0

Available: 10

About This Item:

Multiple Applications – This unique Device Server, Terminal Server and
Serial-over-IP Extender comes packaged as a miniature SFP module.
Small Form Pluggable – The SFP module can be installed any router, switch or media gateway
that has an SFP slot and eliminates box stacking installations.
Conversion and Transport – Transport, Control, Access, and Monitor Asynchronous Serial Terminals
and Devices over the Ethernet/IP/LAN networks.
Selectable Serial Interfaces – Software Selectable for RS-232, RS-422 or RS-485.
Flexible Data Rates – Supports Serial Interface Speeds from 75 bps to 230 Kbps.
COM-PORT Support – Compatible with 3rd-Party COM-Servers, Com-Server Applications,
and can function as a Com-Port Extender.
Gigabit Support – Supports 100BASE-X and/or 1000BASE-X via SFP Interface.
Industry 4.0 – Used for Industry 4.0 Applications Enhancing Industrial Ethernet Switch
& Router connectivity to Serial Devices.
Multiple Protocols & Topologies – Serial data transmission can be done using UDP
or TCP protocols. UDP allows Point-To-Point (PTP) or Point-To-Multipoint (PTMP) operation.
Point-To-Multipoint mode enables broadcasting nodes to build a broadcast configuration.
Configuration & Management – Configuration & Management is done via password protected Web,
Telnet or SSH access. For security the Web, Telnet and SSH access can be set to write-protected using a switch module.
Digital Diagnostic Monitoring (DDM) Available.
Industrial Grade – The Hot-pluggable SFP module is packaged in a rugged fully metallic enclosure for Low EMI,
has an operating temperature between -40°C to +85°C, and includes an embedded temperature sensor.
It offers low power consumption (< 500mW).

Have A Question?

888.996.9609 Ask An Expert >

Industry Best Pricing
Quantity discounts available

Friendly Associates
Pre-sales product and solution advice

Expert Tech Support
Add-on tech support plans available

Super Fast Delivery
Same day shipping on most orders

Patton CIT-SFP module is an Industry 4.0 device that encapsulates asynchronous serial data into IP packets for transport through the network via UDP or TCP. The module can be plugged into any Ethernet device with SFP ports that support 100BASE-FX and/or 1000BASE-X.

Consequently, the device can function as a Device Server, Terminal Server and/or Serial-over-IP Extender. This allows transport, control, access, and monitoring of Asynchronous RTUs and other devices over the Ethernet/IP/LAN networks.

The serial Interfaces are user selectable using software to for RS-232, RS-422 or RS-485 and can support data rates from 75 bps to 230 Kbps. The unit works with 3rd-Party Com-Ports, COM-Servers, and Com-Server Applications, and can function as a Com-Port Extender.

Serial data transmission can be done using UDP or TCP protocols. UDP allows Point-To-Point (PTP) or Point-To-Multipoint (PTMP) operation. Point-To-Multipoint mode enables broadcasting nodes to build a broadcast configuration.

Configuration and management are done via password protected Web, Telnet or SSH access. For security the Web, Telnet and SSH access can be set to write-protected using a switch module. Digital Diagnostic Monitoring (DDM) Available.

The SFP module is packaged in a rugged fully metallic enclosure and supports operating temperatures between -40°C to +85°C and includes an embedded temperature sensor.

MODEL	CIT-SFP/RJ45
SERIAL CONNECTOR	• RJ-45 (8-pins) • Pin-Out RS232. Pin 4 Ground, Pin 5 RX, Pin 6 TX, Pin 7 CTS, Pin 8 RTS • Pin-Out RS485/RS-422 Full Duplex. Pin 4 Ground, Pin 5 RX-, Pin 6 TX+, Pin 7 RX+, Pin 8 TX- • Pin-Out RS485 Half Duplex. Pin 4 Ground, Pin 5 DX-, Pin 7 DX+
SERIAL PAYLOAD	Over UDP or TCP
OPERATING MODES	• UDP Point-To-Point • UDP Point-To-MultiPoint (“Master” sends serial data using a multicast IP Address (IPM) with a PORT Number (PORTM). • Endpoints with input PORT Number PORTM accept received data and other endpoints will discard it • TCP Point-To-Point (configured as Server and Client) • COM-Server (COM Port Extender, Virtual Serial Port) Point-To-Point. • Serial data endpoint should be configured as Server and the Terminal as Client.
CONFIGURATION	• WebGUI • Telnet and SSH CLI Commands (according to ITU-T Rec. M.3400 Telecommunication Management Networks
TOGGLE SWITCH	• Left Position = Factory Default. The unit will start-up to its default values • Center Position = Normal Mode. Remote Management enabled • Right Position = Blocking Mode. Write protected, so you can only read the values in the CLI and/or WebGUI
SFP ETHERNET INTERFACE	• MSA Compliant • 100 Mbps (100Base-FX) • 1000 Mbps (1000Base-X)
SFP HOST POWER	• MSA Compliant • Input Voltage 3.135 (Min), 3.3 (Typical), 3.465 (Max) V DC • Input Current 120 (Typical), 140 (Max) mA
DIAGNOSTICS	• The SFP MSA defines an enhanced memory map with a digital diagnostic monitoring interface for SFP transceivers that allows pseudo real time access to device operating parameters. • It defines a 256 bytes memory map which is accessible over a 2-wire serial interface at the 8-bit address 1010000X (A0h), the ID fields. • The digital diagnostic monitoring interface makes use of the 8-bit address 1010001X (A2h)
ENVIRONMENTAL	• Storage Temperature -40 to +85 °C • Operating Temperature -40 to +85 °C • Relative Humidity 5 to 95% non-condensing
COMPLIANCES	• Safety EN 62368-1:2020/A11:2020, IEC 62368-1:2020/A11:2020 • EMC EN 300 386 V1.6.1:2012, EN 55032:2015/A11:2020 class B, EN 55035:2017/A11:2020 criterion A, • EN 61000-4-2:2009 ± 8 kV contact discharge ± 15 kV air discharge, EN 61000-4-3:2020 10 V/m (80-1000 MHz), • EN 61000-4-6:2014 10 V (150 kHz-80 MHz) • Lifetime/MTBF: 1’392’757 H, λ (10-9 h-1) = 718, Siemens Norm SN 29500, Temperature 40°C • RoHS RoHS2 Directive 2011/65/EU and 2015/863/EU WEEE Directive 2012/19/EU
Manufacturers	PATTON